How to solve the slow startup speed of Windows 10?

How to solve the slow startup speed of Windows 10?

To improve the startup speed of Windows 10, you can start from the following aspects. 1. To disable the startup option, right-click on the blank space in the taskbar, select [Task Manager], click on the [Start] option, select the software that does not require startup, and then click on [Disable] below.

  1. Enable Quick Start 1. Shortcut key [Win+X] to open the shortcut menu, click on [Settings], enter and open [Control Panel] on the pop-up page, select [Hardware and Sound] in the control panel, and under [Power Options], select [Hardware and Sound]
  2. After entering the power options page, click on “Change Currently Unavailable Settings”. Finally, under “Shutdown Settings”, check “Enable Quick Start (Recommended)” and click on “Save and Modify” (if this option is checked, uncheck and save to exit, then check again to save) Skip waiting time: 1. Right click on this computer, click on Properties, and select Advanced System Settings;
  3. 2. After popping up and entering, check both options in “System Startup” and change the following numbers to 0, or simply uncheck these two options and click “OK” below. Turn off motherboard CSM. Simply put, there are three BIOS boot modes: Legacy, UEFI, and Legacy+UEFI. UEFI is the latest and most advanced, and its boot time is about 2 seconds less than the other two. Motherboards from the previous 10 years should support UEFI boot mode. However, due to some historical legacy issues, the motherboard will default to enabling CSM function, which is designed to be compatible with LeFi. “gacy boot mode sacrifices approximately 4 seconds of startup time. If your system is already UEFI booting, the CSM function is of no help to you, so you can confidently turn it off. CSM can also be set to boot on the motherboard Found in. Windows 8 and above systems can open the system information by pressing [Win+R] and entering “msinfo32” after booting up, and then check the BIOS mode. Other systems can open the setupact.log log file in the C: \ Windows \ Panther directory of the system partition, search for the Detected Boot Environment entry, and check if the boot type is UEFI or BIOS. In addition, a small number of motherboards can also turn off the display of the motherboard logo when booting up, which can save about 1 second of startup time. 5. Maximize the number of processors and press the [Win+R] key to open the runtime window. Enter “msconfig” and click OK. In the pop-up window, select [Boot] and click [Advanced Options]; On the pop-up page, check 【 Number of Processors 】 and select the maximum data. Finally, click 【 OK 】 to proceed. The slow startup speed and lagging operation of computers are the most common problems that plague us when using them. To solve similar problems, we can start from both software and hardware aspects. In terms of software, make good system settings, save the software on non system disks, and regularly clean the cache; In terms of hardware, it is recommended that friends with conditions install SSDs, which can be considered the key to speed up~


No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *